SunDanzer Refrigerator – Freezer 12 #sundanzer, #sundanzer #refrigerator, #solar #refrigerator, #12 #volt #refrigerator, #12 #volt


#

Sizes Available:
5.8 CF – (#165 Refrigerator or Freezer, 100 lbs)
8.1 CF – (#225 Refrigerator or Freezer, 120 lbs)
3.7 CF – (#105 PV Direct -No Battery)

Features for All SunDanzer Models:
Energy-Efficient
Automatic operation
Thick polyurethane insulation 4.33
Lockable lid
Interior light
Corrosion resistant coated steel exterior
Patented low-frost system
Easy to clean interior
Low maintenance


Very Energy Efficient Refrigeration
Freezing

Battery-Powered Units
Save on system costs with SunDanzer battery-powered solar refrigerators and freezers. These highly efficient units with exceptionally low energy consumption require a smaller photovoltaic (PV) system for your refrigeration needs.SunDanzer units feature 4.33 (110 mm) of polyurethane insulation and coated steel cabinets. (No power consuming fan ). The brushless DC motor compressor operates on 12 or 24 VDC, self sensing the voltage input. A patented low-frost system reduces frost build-up for low maintenance. These units cool off using the exterior surfaces as a coil which uses much less energy. Cannot put in a confined space of course which would not allow air to circulate on the exterior surfaces of the unit.

SunDanzer chest-style refrigerators and freezers are easy to clean using the drain hole at the bottom of the unit. With thick insulation and a refrigeration system optimized for solar, SunDanzer refrigerators and freezers provide outstanding economical and reliable operation. SunDanzer cabinets are commercially produced in Sweden at one of the world’s leading refrigeration unit manufacturers and uses a state-of-the-art Danfoss compressor.

ENERGY CONSUMPTION
Note: These numbers represent a unit that is not opened during the day and represents the absolute lowest usage and can be used to compare other mfg’s. See our Watt Usage Chart that has built into the numbers 50% to 80% (Multiply by 1.5 -1.8 ) more consumption to represent actual residential use to calculate your Amp-Hour daily load to figure battery size.

Note: The Energy required to cool a completly empty Refrigerator or Freezer is more than if it had food inside. The above numbers are for a completly empty unit.

PV SIZING CHART – RESIDENTIAL USE – Off Grid —- PDF File
PV Sizing Chart Commercial Use – Off Grid —- PDF File
Remeber that Commercial Refrigerators and Freezers are opend far more often and work much harder and require more power to keep cold

DCR DCF General Specifications
1-Year Warranty
Voltage requirement: 12 or 24 VDC, (Our unit self senses either input)
Refrigerant: R-134a
Polyurethane insulation: 4.33 . 11cm
Cable length: 6 feet. 2cm

Battery-Free Solar Refrigerator
Using space age technology, SunDanzer also offers a revolutionary design for true plug and play operation eliminating the need for batteries and charge controllers. During cloudy weather, internal thermal storage keeps products cold for up to 7 days.

The BFR Series is designed for use in locations with at least 5 sun-hours per day. The highly efficient system, developed at NASA, uses a variable speed compressor and peak power tracking. For areas with less than 5 sun-hours per day, the DC Series is recommended. Cooling Fan helps cool this unit.


Air conditioner sales and installation #air #conditioning #sales #orange #county, #ac #sales #orange #county, #air


#

Alicia Air’s Residential
Air Conditioning Sales Installation

Sales Service Repair
Installation/Maintenance

  • Family Owned Since 1980
  • Located in Orange County
  • Factory Authorized
  • Honest Upfront Flat Rate Pricing
  • Expert Service on All Brands

Since 1980 we have provided our valued clients with quality, affordable air conditioning sales and installation. We are a family-owned, full-service dealer with extensive experience with all major brands of air conditioners and heat pumps. Whether you require replacement of your existing system or installation of air conditioning for your new or remodeled home, we will help you find the most efficient and cost-effective solution. We carry a wide range of systems to fit all budgets. and as a factory-authorized dealer any special pricing we receive is passed on as savings to you. Our high efficiency units can even significantly lower your monthly utility bills.

Alicia Air will perform a free, comprehensive survey of your home to find the right air conditioning to suit your requirements. We take into account the size, type, and aesthetic of your home, and diagnose problems such as certain rooms being too hot/cold, or leaky ductwork. We will inspect your existing equipment and examine your current energy bills to find the most efficient air conditioning system for you, and then provide you with an honest price estimate before the job begins. We offer flat rate pricing and this quote is based on the services needed, no matter the time it takes to complete the work. Our expert, factory-authorized technicians are NATE and EPA certified, fully licensed and insured. and trained on an ongoing basis in the latest air conditioning installation techniques. Our skilled technicians arrive with a fully equipped service truck and use shoe covers and drop cloths to protect your home. We guarantee our workmanship and your project will always be completed in a timely manner.

We offer convenient appointments, and our emergency services are available 24 hours a day, seven days a week, 365 days a year. We accept cash or credit cards. Alicia Air has access to financing options with approved credit, and we will let you know about manufacturer, utility and government rebate programs. Call us today to schedule your free evaluation.

A Complete 20-point Air Conditioner Tune-Up

  • Check thermostat calibration
  • Monitor refrigerant pressure
  • Test AC starting capabilities
  • Test air conditioner safety controls
  • Clean and/or replace standard air filters
  • In place, clean and adjustment of blower components
  • Tighten electrical connections
  • Measure volts and amps
  • Lubricate all moving parts
  • Clean condensate drain
  • Measure temperature difference between supply air and return air
  • Monitor cooling cycle
  • Inspect evaporator coil
  • Examine installation quality
  • Examine equipment condition area, and clearances
  • Inspect condenser coil for dirt or damage
  • Check disconnect for function and wear
  • Check TXV / metering device for proper operation
  • Inspect seismic restraints
  • Inspect refrigerant lines for insulation and penetration integrity

Reviews

I want to thank the entire team at Alicia Air for all of their hard work. The professionalism of each member is unequal. From their knowledge of the products and help in selecting the one just right for us.

Indoor Air Quality

The issue of indoor air quality (IAQ) is becoming an increasingly signifi cant issue to homeowners around the country. According to a recent survey, three in ten homeowners are looking for indoor air quality improvements (Decision Analyst, Inc. March 2007). Families have begun to value the control they can exercise over the climate in their home.

New Equipment Gallery


Top 12 Websites With the Most Fashionable and Affordable Clothing for College Students #retail #solutions


#online shopping websites

#

Top 12 Websites With the Most Fashionable and Affordable Clothing for College Students

College students tend to be busy all the time. I don’t know about you, but I don’t always have time to go to the mall and look for clothes. Not only is online shopping fast and convenient, but you can find awesome deals that are sometimes harder to find in stores. It is possible to look stylish and not have to spend half of your bank account on your clothes.

Here are a few great websites to shop from to get fashionable and affordable clothing for men and women:

This is probably the most popular website for college students to buy clothing from. Forever 21 always has the latest trends and their clothes are incredibly cheap. This is one of my favorite stores to order clothes and accessories from online. Shopping online at Forever 21 is great because you can most likely find everything that you want in your size, whereas the stores may not always carry everything. It also has clothing for virtually everyone — from the Love 21 collection to the plus size collection. And yes, boys, you can shop here too! The men’s section has a wide variety of hip clothing to choose from!

Mod Deals is an online women’s fashion store that sells accessories, jewelry, purses and beauty products. The items are inexpensive and cute.

Styles For Less has many store locations, but doing your online shopping from the website is the easiest option. It sells women’s clothing, footwear and more. There are tons of amazing deals and sales, as well as several clothing options. I don’t think many college students know about this website, so you should definitely check it out when you’re online shopping!

This website has clothes under $10 for everyone. You can get men’s and women’s clothing for really low prices. The best part is that everything is trendy and either $10 or less. You can’t go wrong with shopping here because you won’t have to completely empty your pockets and feel guilty about buying a bunch of things later.

5. Necessary Clothing

Necessary Clothing has fashionable women’s clothing at cheap prices. You can get free shipping if you spend $125 or more within the US. Check out the new arrivals, sales, dresses, shoes, and more. This is a great website to shop at that not many college students are aware of.

Charlotte Russe is a popular store for young women. I love this store, but unfortunately, my campus does not have one anywhere near it, so the website is where I do my shopping. There are always deals going on at Charlotte Russe, especially for shoes. You can buy one pair of shoes and get another pair for $5. The skirts and dresses are stylish and super cheap.

Rue 21 offers amazing clothes for both men and women. You can find awesome graphic tees, dresses, skirts, accessories, fragrances and much more. Rue 21 always has sales going on. This is one of my favorite stores because it has trendy clothes that cost little money.

Deb sells women’s clothes that are perfect for college students, no matter what size you are. They have both junior sizes and plus sizes. You can get anything from a prom dress to a jumpsuit at Deb .

Go Jane has pretty women’s clothes for every occasion. You can look at trends and buy accessories like hats, belts, and sunglasses for low prices. Browse through the website to see what’s new and trending.

ASOS sells both men’s and women’s clothing. You can find a variety of different styles and even buy vintage clothing. If you join ASOS on Campus (for college students), you can get 10 percent off of your purchases. Pretty amazing, right?

Sammy Dress has really cheap clothing for both men and women. It is perfect for college students because many of the items ship in 24 hours and even ship for free.

A lot of my friends order clothes from Urban Original. It only sells items for women. There is almost always a sale going on, like buy one, get one 50 percent off. You buy popular styles and brands, but you get them for extremely cheap. This is a good place to buy shoes and dresses for going out.

All of these are great places for online shopping because you get incredible savings while purchasing fashionable items. Next time you are shopping online, browse through some of these stores. Tell all of your other college friends about them so they stop wasting money on expensive clothes. Your bank accounts will thank you.


RETAIL INDUSTRY ADDED 12, 000 JOBS IN AUGUST – Accessories Magazine #suzy #coupon


#retail industry jobs

#

IAC SETS DATES FOR THE 18TH FASHION + DESIGN CONFERENCE “PIONEERS”

IAC SETS DATES FOR THE 18TH FASHION + DESIGN CONFERENCE “PIONEERS”

FINAL CHANCE: FALL/WINTER 17/18 TREND WEBINAR ON TUESDAY

FINAL CHANCE: FALL/WINTER 17/18 TREND WEBINAR ON TUESDAY

NORDSTROM DEBUTS HERMES SHOP TARGETING MILLENNIALS

NORDSTROM DEBUTS HERMES SHOP TARGETING MILLENNIALS

ITEM OF THE DAY: VEERAH SHOE TASSELS

ITEM OF THE DAY: VEERAH SHOE TASSELS

NPD STATS: LOGOS ARE A NO-GO FOR TODAY S HANDBAGS

NPD STATS: LOGOS ARE A NO-GO FOR TODAY S HANDBAGS

ITEM OF THE DAY: ADOLFO DOMINGUEZ POM POM CLUTCH

ITEM OF THE DAY: ADOLFO DOMINGUEZ POM POM CLUTCH

RETAIL INDUSTRY ADDED 12,000 JOBS IN AUGUST

According to the National Retail Federation, the retail industry added 12,000 jobs in August as compared to July (the NRF excludes automobile dealers, gasoline stations and restaurants from its calculations). New retail jobs made up a significant portion of the 151,000 jobs the Labor Department said were gained in all industries nationwide.

On a three-month moving average, retail employment as calculated by NRF has increased by 13,700 jobs since the same time last year. Since August 2015, the retail industry has added 222,300 jobs.

The number of unemployed persons was essentially unchanged at 7.8 million in August, with the unemployment rate at 4.9% for the third month in a row. This missed the Reuters economists estimate for 4.8% unemployment. Both measures have shown little net movement over the year, according to the government.

In August, average hourly earnings for all employees on private non-farm payrolls rose by 3 cents to $25.73, and average hourly earnings of private-sector production and non-supervisory employees rose by 4 cents to $21.64. Over the year, average hourly earnings have risen by 2.4%.

“Today’s payroll data is solid for this late stage in the labor market cycle, though the gains are not as exciting as the past two months,” NRF Chief Economist Jack Kleinhenz said. “The payroll numbers do not clarify whether a liftoff of interest rates by the Federal Reserve is imminent. Nonetheless, more jobs mean more income and this is a preliminary positive indication for ongoing consumer spending.”

Please enable JavaScript to view the comments powered by Disqus.

CONNECT WITH US

The Daily Scoop

Fashion News From Around the Web

Fashionista / October 24, 2016

Popsugar / October 24, 2016

Bloomberg / October 24, 2016

American Apparel is up for sale and the bidders are

The Wall Street Journal / October 24, 2016

Customer Login

SUBSCRIBE TO THE MAGAZINE

Published 5 times a year (January/February, March, May, August & November) Accessories Magazine’s print issue is the only publication devoted exclusively to your business: Accessories! Our extensive menu of features, retailer roundups, surveys, proprietary industry reports, profiles, advanced trends and fashion visuals offers an overview of the entire accessories market unavailable from any other source.

SIGN UP FOR DAILY E-NEWSLETTER


12 best practices for retail-ready packaging #discount #coupons #online


#retail packaging design

#

12 best practices for retail-ready packaging

Retailers have taken notice at how the economics of high-volume, fast-moving consumer goods have changed in recent years. Led by big box stores, these retailers have seen the wisdom of trimming one of their biggest costs of operation—store floor personnel hours spent restocking or “facing up” products on shelf.

Brand owners have scrambled to meet retailers’ requests with retail-ready solutions ranging from large corrugated boxes with loose packages to smaller, notched paperboard holders for stand-up display of carded packages—and all points in between. The specific type of retail-ready package for the job depends on the specific retail environment where the products will live, but there are many factors to consider.

1. Remember the primary market drivers. The trend toward more retail-ready packaging is driven by retailers’ desire to reduce store staff hours. The ideal retail-ready package is a shipping package that can be almost instantly shelf-ready. Understand the brief or the specific goal you need to meet completely, and ask for all marketing input upfront. Get shopping data from retailers, if possible, to learn what forms have been working for the retailer, and keep those in mind throughout the package development process.

Related Sponsored Content

2. Engage suppliers early. Always work closely with suppliers in order to optimize the retail product SKUs and features before starting the real project. Make sure you understand the customers’ requirements—all of them. Shelf dimensions, rate of sale, automated warehouse systems, and distance travelled all can have an impact on how successful any retail-ready package is. Even if you start with a previously successful structural design, still plan for lead time in sorting out problems along the way.

3. Mind your perforations. The type of perforation will affect the ease of tearing, and the design and placement of a tear-off part will affect the strength of the package. One best practice when designing retail-ready packaging is to double-check that your new packaging design will work with the current packaging equipment. A simple thing like a perforation pattern can end up right where a suction cup is supposed to pick up and place a package, which can cause major issues for something relatively small.

4. Maximize the experience for retailer staff. Keep it simple. Perform ethnographic research and carefully watch retailer staff interact with existing retail-ready packaging. Make the packaging intuitive for the stock person to display correctly. Too many parts and wordy instructions should be avoided. Instead, develop easy-to-follow graphic instructions as long as they don’t detract from the overall visual design. Construct a package that contains a reasonable quantity of product, that can be loaded in a single action, and that is easy to swap out and dispose of with minimal waste. When reasonable, make reloading possible even with some quantity of product still in the retail-ready packaging, to avoid stock-outs.

5. Maximize the experience for consumers. Always design with the consumer in mind. Make sure the packaging is not only easy to stock on shelf and looks great, but also that the consumer can remove the primary product package from the retail-ready packaging easily. With the short time you have to get the consumer’s buy decision, you can’t afford to be hard to pick up at the crucial moment of sale. Square-ness and perpendicularity are critical to a sturdy, stackable presentation, but avoid sharp corners and edges for customer safety and comfort when reaching into the retail-ready packaging.

6. Go the extra mile for marketing. Make it easy to see the primary product’s main claim to fame. Make sure the artwork fits the parameters required by the package and the equipment. In addition, the artwork must be repeatable with colors that can be readily and easily matched. A best practice is to buy a machine that is flexible enough to meet the consumers’—and marketers’—ever-changing needs. Think about how the retail-ready packaging will look as it sells down, with fewer packages on the shelf. Take advantage of opportunities to add branding and marketing messages that will mimic the primary package, delight with bold graphics, or reinforce a brand proposition.

7. Compromise to align goals. Retail-ready packages should be thought of holistically, as primary package design has an impact on secondary packaging and on pallet optimization. Reducing material thickness cuts costs, but a common pitfall is not having heavy enough carton weight, or strong enough seals, to hold the contents securely during shipping. Understanding the quality of overseas board is critical when designing a retail-ready package. Develop multiple mockups and test packages with drop tests and on actual shelves to confirm viability.

8. Invest in thorough design exploration. Let packaging designers do their job to prevent design by committee. Avoid “me-too” packaging strategies that dilute the brand. Start with the mandatory labeling elements on the retail-ready packaging first and then design around them, because starting with a graphic element first can be counterproductive. Retail-ready packages are highly marketing driven, so creativity in graphic package design tends to trump functionality. Look to other categories for inspiration. Finally, use a collaborative approach with production to design a functional package that is both eye-catching and easily automated.

9. Present a conscientious structure. Avoid odd shapes and complicated packaging that will not be seen as efficient by the retailer and the consumer. Avoid standard “stadium case” packaging that does not perform well on shelf. One pitfall is falling into something so specialized there is no flexibility in materials supply. Whenever possible, minimize the dimensional changes between SKUs and packaging. For instance, if you have a series of cartons for the same product but different counts, only change one dimension, which in turn could prevent changes in case dimensions.

10. Simplify the visual presentation. Maximize shelf presence without sacrificing package integrity. Limit the initial visual impact to one key message that shoppers will recognize. If you can get away with a single beautiful picture, even better. Use attention-getters such as “New,” “Improved,” “Special,” and “Better.” Point out a unique structure or innovative value-added opening function that might encourage consumers to pick up the package.

11. Don’t skimp on printing. Flexographic printing on corrugated and paperboard has improved in recent years, but make sure not to compromise the brand’s visual equity. Make sure brand impression still is strong and represents the brand in its best light, and that print registration stays within acceptable variances. And consider shelf wear and its impact on shelf appearance when choosing materials and finishes.

12. Sweat the details. In-the-field testing is almost a must to avoid failures with packaging that inhibits product from being picked off the shelves because of its bad appearance. If feasible, invest in ISTA certification. Use only certified materials for distribution in the geographic locations intended, and maintain records of objective evidence of certification. Double-check all retailer specifications, including pallet type, weight, height, materials, signage, etc. Consider quality control camera inspection to ensure the right materials are used and the right UPC code is present on every package. And plan ahead: Take into account all the potential variables, including the marketing department’s tendency to change the primary package size every year.


How to Buy Dry Ice: 12 Steps (with Pictures) #retail #recruitment #agencies


#dry ice retailers

#

wiki How to Buy Dry Ice

Dry ice is frozen carbon dioxide, the gas that we exhale when we breathe. It’s called dry ice because it changes from a solid to a gas, or sublimates, under normal atmospheric conditions without going through a wet liquid stage. [1] Whether you’re making a science project or creating cool fog-effects, follow these steps for safely handling dry ice.

Steps Edit

Part One of Three:
Buying and Transporting Dry Ice Edit

Pick up dry ice at your local grocery or general merchandise store. Stores that sell dry ice include Safeway, Walmart, and Costco.

  • Plan to pick up dry ice as close to the time you will need it as possible. Since it is constantly changing from solid to gas, it has a very short shelf-life. Every 24 hours, 5-10 pounds of dry ice turns from a solid to a gas. [2]
  • Though most people can buy dry ice, some stores will require you to be at least 18 years of age in order to purchase it.

Buy dry ice in block form. Performing school experiments and creating fog effects both require blocks of dry ice.

  • Dry ice also comes in pellet form but is mainly used for dry ice blasting to clean surfaces, or for medical transportation.
  • The price of dry ice ranges anywhere from $1.00 to $3.00 per pound. Though prices vary based on amount and location, it generally tends to be cheap.

Place the dry ice in an insulated container like a plastic cooler/ice chest. Since dry ice is much colder than traditional freezing containers (-109.3 to -78.5 degrees Celsius), it won’t be kept cool by your average freezer or refrigerator.

  • The thicker insulated your cooler or ice chest is, the slower the dry ice will sublimate.
  • Open and close the container as little as possible to slow down the sublimation process. You can also fill the open space in the cooler with wadded paper to limit dead space and slow down sublimation as well. [3]
  • Storing dry ice in the freezer may actually shut off your freezer’s thermostat. Since dry ice is extremely cold, your freezer will shut off to keep foods from over-freezing. [4] Consequently, if your freezer breaks down and you need to keep the food inside frozen, you can put dry ice inside and it will act as a substitute.

Put the cooler in your car and roll down the windows. Remember, dry ice is carbon dioxide and is harmful if inhaled in large quantities.

  • Fresh air is especially important if you are transporting dry ice for longer than 15 minutes. Being in a poorly ventilated area with dry ice can cause rapid breathing and headaches and can be lethal if breathed over long periods. [5]

Top 10 ideas from Retail over the last 12 months #retail #franchise


#retail display ideas

#

Not yet a member? Sign up up to Springwise Access today to unlock the following:

+ Exclusive content and thought leadership.

Precision Search Tools

Innovations by industry, region, demographics and business model.

Group innovations in to projects, create reports, and share with team members.

Personalized Browsing Experience

A bespoke and tailored browsing experience, based on your interests.

Bespoke Reports and New Newsletters

Digestible snapshots on the future of your industry

Top 10 ideas from Retail over the last 12 months

Here s a rundown of our top ten innovative Retail ideas over the last year.

Shopping can be a trial for some, and it s a widely held belief that many men can find it more of a chore than women. Aiming to improve the experience for men, Hointer added QR codes to their jeans so that customers could simply scan the code in order to get their desired size delivered to a changing room ready for them to try on. This streamlined process saves customers from having to wade through piles of clothing to find their size, ultimately speeding up a shopping trip for those who would rather be elsewhere.

2. Facebook app lets runners pay with kilometers completed

We ve seen apps that reward their users with motivational phrases when they exercise. However, Nike Mexico took this a step further with their Facebook auction, Subasta de Kilometros, which allowed runners to accrue points for every kilometre run and then use these points to bid on Nike-branded running gear in the auction. Through this app Nike Mexico cannily provided an extra incentive for runners to keep fit, at the same time as promoting their products.

3. In China, virtual reality stores turn open spaces into a supermarket

With the aim of providing a more interactive shopping experience, Yihaodian in China developed augmented reality stores that can only be accessed in certain public locations. When customers point their smartphone in the right direction at locations such as public squares, a virtual store is displayed where items sit on shelves or hang from the walls. This app provides a simulation of a physical retail store so shoppers can feel more immersed in their online shopping trip.

4. In Denmark, supermarket crowdsources suggestions for local products

As concerns grow over food air miles, and more consumers want to buy local, SuperBrugsen in Denmark has come up with a novel way of ensuring that the produce they stock will appeal to eco-minded consumers. Through their website, customers can suggest particular local items they would like the store to stock, after which managers will taste-test the items to ensure their quality. A clever way to use customer crowdsourcing to ensure that the store only stocks items that will sell. The crowds have also been put to good effect in the Netherlands through the Avoid The Shopping Crowds app that analyzes social media feeds to tell the user how busy a shop is before they enter it. Both businesses use crowdsourced data to improve real life experience.

5. Mobile app lets retail store shoppers skip the checkout lines

The convenience of popping to the shops for a few grocery items can be hampered by long queues. This was something the brains behind QThru recognized when they developed their app, which allows shoppers to browse, scan and buy products all through their phone. Skipping the queues is an appealing prospect for many, and with that in mind we also saw SoPost. which uses customer s email addresses to deliver purchases, rather than the traditional home or work address. An interesting idea that reflects the increasingly mobile lives many lead.

6. Brazilian fashion retailer displays Facebook ‘likes’ for items in its real-world stores

We ve seen those involved in retail adjust impressively to the increasingly online world we live in. C A provided a good example of how the real world and the online can converge to create a modern shopping experience. By displaying Facebook ‘likes’ on small screens embedded in articles hangers, the retailers showed the increasing tally of ‘likes’ different items of clothing were receiving from web users. The hope was that approval from the online community would encourage shoppers to purchase an item of clothing.

7. Machine accepts cards for tips

Increasingly, cash is being passed up in favor of card payments. This makes for a lighter purse, but can also mean that cash rituals such as tipping can be left by the way side. DipJar aims to remedy this by offering an easy way for cardholders to tip, in the form of a machine placed near the till that customers need only place their card into quickly for a USD 1 tip to be taken. If they wish to give more they can just place the card the desired amount of times. A simple innovation for the retail industry that encourages generosity in a world where plastic is paramount.

8. Calming UK store campaign includes quiet shopping areas and debranded products

Facing the shops can be a fraught experience, particularly at busy times such as seasonal sales or the lead-up to Christmas. Nowhere are the staff more aware of the stress involved in shopping than at Selfridges, a huge UK department store, and they decided to lessen the burden for customers by introducing the No Noise campaign. Specifically, when customers entered designated silent areas they had to remove their shoes and hand over their phones. All products in these zones were de-branded. Concern for customers will rarely go unappreciated, and Selfridges may well have earned themselves a few life-long customers with this campaign.

9. In New York, bedroom furniture store lets customers nap for free

Making customers feel comfortable can only increase the likelihood that they will make both a purchase and a return visit. COCO-MAT took this truism quite literally, and offered a try-before-you-buy approach for their beds. Visitors to the store were allowed to nap in the beds for a couple of hours and received a free glass of orange juice, but were not obliged to buy after trying. The idea behind the campaign was to spread word of the bed store and consequently increase footfall.

10. At Brazilian retailer, RFID tracks merchandise from manufacturer to customer

Shop assistants must dread the words Have you got any more of…? seeing as it often prompts a trawl through the back room to see if an item is available in a particular size. But Brazilian Memove s RFID stock tracking technology could consign such headaches to the past thanks to tags stitched into the clothing that monitor all items from manufacturing to the moment the customer walks out of the shop with the purchased product. Keeping track of the stock supply chain can be made much simpler through the use of technology, and Memove provides a fine example.

Images/Video:

Subscribe to our free newsletter for innovations like this one direct to your inbox

Join the Discussion


Top 12 Websites With the Most Fashionable and Affordable Clothing for College Students #retail #sales


#online shopping websites

#

Top 12 Websites With the Most Fashionable and Affordable Clothing for College Students

College students tend to be busy all the time. I don’t know about you, but I don’t always have time to go to the mall and look for clothes. Not only is online shopping fast and convenient, but you can find awesome deals that are sometimes harder to find in stores. It is possible to look stylish and not have to spend half of your bank account on your clothes.

Here are a few great websites to shop from to get fashionable and affordable clothing for men and women:

This is probably the most popular website for college students to buy clothing from. Forever 21 always has the latest trends and their clothes are incredibly cheap. This is one of my favorite stores to order clothes and accessories from online. Shopping online at Forever 21 is great because you can most likely find everything that you want in your size, whereas the stores may not always carry everything. It also has clothing for virtually everyone — from the Love 21 collection to the plus size collection. And yes, boys, you can shop here too! The men’s section has a wide variety of hip clothing to choose from!

Mod Deals is an online women’s fashion store that sells accessories, jewelry, purses and beauty products. The items are inexpensive and cute.

Styles For Less has many store locations, but doing your online shopping from the website is the easiest option. It sells women’s clothing, footwear and more. There are tons of amazing deals and sales, as well as several clothing options. I don’t think many college students know about this website, so you should definitely check it out when you’re online shopping!

This website has clothes under $10 for everyone. You can get men’s and women’s clothing for really low prices. The best part is that everything is trendy and either $10 or less. You can’t go wrong with shopping here because you won’t have to completely empty your pockets and feel guilty about buying a bunch of things later.

5. Necessary Clothing

Necessary Clothing has fashionable women’s clothing at cheap prices. You can get free shipping if you spend $125 or more within the US. Check out the new arrivals, sales, dresses, shoes, and more. This is a great website to shop at that not many college students are aware of.

Charlotte Russe is a popular store for young women. I love this store, but unfortunately, my campus does not have one anywhere near it, so the website is where I do my shopping. There are always deals going on at Charlotte Russe, especially for shoes. You can buy one pair of shoes and get another pair for $5. The skirts and dresses are stylish and super cheap.

Rue 21 offers amazing clothes for both men and women. You can find awesome graphic tees, dresses, skirts, accessories, fragrances and much more. Rue 21 always has sales going on. This is one of my favorite stores because it has trendy clothes that cost little money.

Deb sells women’s clothes that are perfect for college students, no matter what size you are. They have both junior sizes and plus sizes. You can get anything from a prom dress to a jumpsuit at Deb .

Go Jane has pretty women’s clothes for every occasion. You can look at trends and buy accessories like hats, belts, and sunglasses for low prices. Browse through the website to see what’s new and trending.

ASOS sells both men’s and women’s clothing. You can find a variety of different styles and even buy vintage clothing. If you join ASOS on Campus (for college students), you can get 10 percent off of your purchases. Pretty amazing, right?

Sammy Dress has really cheap clothing for both men and women. It is perfect for college students because many of the items ship in 24 hours and even ship for free.

A lot of my friends order clothes from Urban Original. It only sells items for women. There is almost always a sale going on, like buy one, get one 50 percent off. You buy popular styles and brands, but you get them for extremely cheap. This is a good place to buy shoes and dresses for going out.

All of these are great places for online shopping because you get incredible savings while purchasing fashionable items. Next time you are shopping online, browse through some of these stores. Tell all of your other college friends about them so they stop wasting money on expensive clothes. Your bank accounts will thank you.


RETAIL INDUSTRY ADDED 12, 000 JOBS IN AUGUST – Accessories Magazine #store #jobs


#retail industry jobs

#

IAC SETS DATES FOR THE 18TH FASHION + DESIGN CONFERENCE “PIONEERS”

IAC SETS DATES FOR THE 18TH FASHION + DESIGN CONFERENCE “PIONEERS”

FINAL CHANCE: FALL/WINTER 17/18 TREND WEBINAR ON TUESDAY

FINAL CHANCE: FALL/WINTER 17/18 TREND WEBINAR ON TUESDAY

NORDSTROM DEBUTS HERMES SHOP TARGETING MILLENNIALS

NORDSTROM DEBUTS HERMES SHOP TARGETING MILLENNIALS

ITEM OF THE DAY: VEERAH SHOE TASSELS

ITEM OF THE DAY: VEERAH SHOE TASSELS

NPD STATS: LOGOS ARE A NO-GO FOR TODAY S HANDBAGS

NPD STATS: LOGOS ARE A NO-GO FOR TODAY S HANDBAGS

ITEM OF THE DAY: ADOLFO DOMINGUEZ POM POM CLUTCH

ITEM OF THE DAY: ADOLFO DOMINGUEZ POM POM CLUTCH

RETAIL INDUSTRY ADDED 12,000 JOBS IN AUGUST

According to the National Retail Federation, the retail industry added 12,000 jobs in August as compared to July (the NRF excludes automobile dealers, gasoline stations and restaurants from its calculations). New retail jobs made up a significant portion of the 151,000 jobs the Labor Department said were gained in all industries nationwide.

On a three-month moving average, retail employment as calculated by NRF has increased by 13,700 jobs since the same time last year. Since August 2015, the retail industry has added 222,300 jobs.

The number of unemployed persons was essentially unchanged at 7.8 million in August, with the unemployment rate at 4.9% for the third month in a row. This missed the Reuters economists estimate for 4.8% unemployment. Both measures have shown little net movement over the year, according to the government.

In August, average hourly earnings for all employees on private non-farm payrolls rose by 3 cents to $25.73, and average hourly earnings of private-sector production and non-supervisory employees rose by 4 cents to $21.64. Over the year, average hourly earnings have risen by 2.4%.

“Today’s payroll data is solid for this late stage in the labor market cycle, though the gains are not as exciting as the past two months,” NRF Chief Economist Jack Kleinhenz said. “The payroll numbers do not clarify whether a liftoff of interest rates by the Federal Reserve is imminent. Nonetheless, more jobs mean more income and this is a preliminary positive indication for ongoing consumer spending.”

Please enable JavaScript to view the comments powered by Disqus.

CONNECT WITH US

The Daily Scoop

Fashion News From Around the Web

Fashionista / October 24, 2016

Popsugar / October 24, 2016

Bloomberg / October 24, 2016

American Apparel is up for sale and the bidders are

The Wall Street Journal / October 24, 2016

Customer Login

SUBSCRIBE TO THE MAGAZINE

Published 5 times a year (January/February, March, May, August & November) Accessories Magazine’s print issue is the only publication devoted exclusively to your business: Accessories! Our extensive menu of features, retailer roundups, surveys, proprietary industry reports, profiles, advanced trends and fashion visuals offers an overview of the entire accessories market unavailable from any other source.

SIGN UP FOR DAILY E-NEWSLETTER


12 best practices for retail-ready packaging #retail #management #recruiters


#retail packaging design

#

12 best practices for retail-ready packaging

Retailers have taken notice at how the economics of high-volume, fast-moving consumer goods have changed in recent years. Led by big box stores, these retailers have seen the wisdom of trimming one of their biggest costs of operation—store floor personnel hours spent restocking or “facing up” products on shelf.

Brand owners have scrambled to meet retailers’ requests with retail-ready solutions ranging from large corrugated boxes with loose packages to smaller, notched paperboard holders for stand-up display of carded packages—and all points in between. The specific type of retail-ready package for the job depends on the specific retail environment where the products will live, but there are many factors to consider.

1. Remember the primary market drivers. The trend toward more retail-ready packaging is driven by retailers’ desire to reduce store staff hours. The ideal retail-ready package is a shipping package that can be almost instantly shelf-ready. Understand the brief or the specific goal you need to meet completely, and ask for all marketing input upfront. Get shopping data from retailers, if possible, to learn what forms have been working for the retailer, and keep those in mind throughout the package development process.

Related Sponsored Content

2. Engage suppliers early. Always work closely with suppliers in order to optimize the retail product SKUs and features before starting the real project. Make sure you understand the customers’ requirements—all of them. Shelf dimensions, rate of sale, automated warehouse systems, and distance travelled all can have an impact on how successful any retail-ready package is. Even if you start with a previously successful structural design, still plan for lead time in sorting out problems along the way.

3. Mind your perforations. The type of perforation will affect the ease of tearing, and the design and placement of a tear-off part will affect the strength of the package. One best practice when designing retail-ready packaging is to double-check that your new packaging design will work with the current packaging equipment. A simple thing like a perforation pattern can end up right where a suction cup is supposed to pick up and place a package, which can cause major issues for something relatively small.

4. Maximize the experience for retailer staff. Keep it simple. Perform ethnographic research and carefully watch retailer staff interact with existing retail-ready packaging. Make the packaging intuitive for the stock person to display correctly. Too many parts and wordy instructions should be avoided. Instead, develop easy-to-follow graphic instructions as long as they don’t detract from the overall visual design. Construct a package that contains a reasonable quantity of product, that can be loaded in a single action, and that is easy to swap out and dispose of with minimal waste. When reasonable, make reloading possible even with some quantity of product still in the retail-ready packaging, to avoid stock-outs.

5. Maximize the experience for consumers. Always design with the consumer in mind. Make sure the packaging is not only easy to stock on shelf and looks great, but also that the consumer can remove the primary product package from the retail-ready packaging easily. With the short time you have to get the consumer’s buy decision, you can’t afford to be hard to pick up at the crucial moment of sale. Square-ness and perpendicularity are critical to a sturdy, stackable presentation, but avoid sharp corners and edges for customer safety and comfort when reaching into the retail-ready packaging.

6. Go the extra mile for marketing. Make it easy to see the primary product’s main claim to fame. Make sure the artwork fits the parameters required by the package and the equipment. In addition, the artwork must be repeatable with colors that can be readily and easily matched. A best practice is to buy a machine that is flexible enough to meet the consumers’—and marketers’—ever-changing needs. Think about how the retail-ready packaging will look as it sells down, with fewer packages on the shelf. Take advantage of opportunities to add branding and marketing messages that will mimic the primary package, delight with bold graphics, or reinforce a brand proposition.

7. Compromise to align goals. Retail-ready packages should be thought of holistically, as primary package design has an impact on secondary packaging and on pallet optimization. Reducing material thickness cuts costs, but a common pitfall is not having heavy enough carton weight, or strong enough seals, to hold the contents securely during shipping. Understanding the quality of overseas board is critical when designing a retail-ready package. Develop multiple mockups and test packages with drop tests and on actual shelves to confirm viability.

8. Invest in thorough design exploration. Let packaging designers do their job to prevent design by committee. Avoid “me-too” packaging strategies that dilute the brand. Start with the mandatory labeling elements on the retail-ready packaging first and then design around them, because starting with a graphic element first can be counterproductive. Retail-ready packages are highly marketing driven, so creativity in graphic package design tends to trump functionality. Look to other categories for inspiration. Finally, use a collaborative approach with production to design a functional package that is both eye-catching and easily automated.

9. Present a conscientious structure. Avoid odd shapes and complicated packaging that will not be seen as efficient by the retailer and the consumer. Avoid standard “stadium case” packaging that does not perform well on shelf. One pitfall is falling into something so specialized there is no flexibility in materials supply. Whenever possible, minimize the dimensional changes between SKUs and packaging. For instance, if you have a series of cartons for the same product but different counts, only change one dimension, which in turn could prevent changes in case dimensions.

10. Simplify the visual presentation. Maximize shelf presence without sacrificing package integrity. Limit the initial visual impact to one key message that shoppers will recognize. If you can get away with a single beautiful picture, even better. Use attention-getters such as “New,” “Improved,” “Special,” and “Better.” Point out a unique structure or innovative value-added opening function that might encourage consumers to pick up the package.

11. Don’t skimp on printing. Flexographic printing on corrugated and paperboard has improved in recent years, but make sure not to compromise the brand’s visual equity. Make sure brand impression still is strong and represents the brand in its best light, and that print registration stays within acceptable variances. And consider shelf wear and its impact on shelf appearance when choosing materials and finishes.

12. Sweat the details. In-the-field testing is almost a must to avoid failures with packaging that inhibits product from being picked off the shelves because of its bad appearance. If feasible, invest in ISTA certification. Use only certified materials for distribution in the geographic locations intended, and maintain records of objective evidence of certification. Double-check all retailer specifications, including pallet type, weight, height, materials, signage, etc. Consider quality control camera inspection to ensure the right materials are used and the right UPC code is present on every package. And plan ahead: Take into account all the potential variables, including the marketing department’s tendency to change the primary package size every year.